Super Lube 51600 Multi-Purpose Non-Aerosol online shop PTFE Trigge with Oil 51600,/ikra794211.html,Lube,Trigge,Industrial Scientific , Filtration , Compressed Air Treatment,$29,Oil,Non-Aerosol,Multi-Purpose,PTFE,,with,Super,corona.jogjaprov.go.id $29 Super Lube 51600 Multi-Purpose Non-Aerosol Oil with PTFE, Trigge Industrial Scientific Filtration Compressed Air Treatment Super Lube 51600 Multi-Purpose Non-Aerosol online shop PTFE Trigge with Oil $29 Super Lube 51600 Multi-Purpose Non-Aerosol Oil with PTFE, Trigge Industrial Scientific Filtration Compressed Air Treatment 51600,/ikra794211.html,Lube,Trigge,Industrial Scientific , Filtration , Compressed Air Treatment,$29,Oil,Non-Aerosol,Multi-Purpose,PTFE,,with,Super,corona.jogjaprov.go.id

Super Lube 51600 Multi-Purpose Non-Aerosol sale online shop PTFE Trigge with Oil

Super Lube 51600 Multi-Purpose Non-Aerosol Oil with PTFE, Trigge

$29

Super Lube 51600 Multi-Purpose Non-Aerosol Oil with PTFE, Trigge

|||

Product description

To address the environmental concerns of those industrial facilities that do not allow the use of aerosol products, Super Lube Oil with Syncolon (PTFE) lubricant is available in a one quart Trigger Sprayer. Super Lube Oil with Syncolon (PTFE) is a blend of premium synthetic PAO oil, Mineral oil, PTFE micron sized powder and powerful additives that provide superior lubrication protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube Oil with Syncolon (PTFE) is safe on metal, rubber, plastic, wood, leather, fabric and painted surfaces. It is USDA/NSF listed H-1 for incidental food contact.


From the manufacturer

Color: Translucent
Temperature Range: -45°F to 450°F (-43°C to 232°C)
Viscosity 19 @ cSt @ 100°C, 127 cSt @ 40°C
ISO Grade: 150
Replaces ISO Grades: 150 - 200
Replaced SAE Grade Gear Oils: 85W
Viscosity Index: 168
Specific Gravity: .89 @ 60°F
Pour Point: -30°F (-34°C) maximum
Lbs./Gallon 7.4 @ 60°F
Water, PPM: 35 ppm
Tan: 0.04 maximum
4 Ball EP Test Scar Diameter: 0.47 mm
Salt Spray Test (100 hrs.): Pass
Dielectric Loss: 1.2 x 10¹²
Dielectric Resistivity: 1.7 x 10¹⁴

Super Lube 51600 Multi-Purpose Non-Aerosol Oil with PTFE, Trigge

This site describes DAMASK 2.03 the current release version of DAMASK!
For information on the upcomming DAMASK 3 release visit https://damask3.mpie.de.

Purpose

At the core of DAMASK is a flexible and hierarchically structured model of material point behavior for the solution of elastoplastic boundary value problems along with damage and thermal physics. Its main purpose is the simulation of crystal plasticity within a finite-strain continuum mechanical framework.

Crystal plasticity

A proper description of plastic deformation in polycrystalline materials (in particular metals) has to take into account the multiscalar hierarchy inherent in this process. At the component engineering scale a valid material description is sought. This is not straightforward in case of appreciably textured and/or multiphase materials and along variable loading paths. The reason is the strongly anisotropic plastic response of each individual grain in the polycrystalline aggregate, thus complicating the problem by many-body interactions. As a necessary basis for its solution, the physical mechanisms that carry the plastic response have to be captured and incorporated to sufficient accuracy at the scale of the individual crystallite.

Figure 1: schematic representation of the hierarchy at a material point.

Image sources: door panel, polygrains, Rivet Mid-Century 2-Toned Stoneware Planter, 6.3"H, Gray and Whi

The overall simulation task can thus be conceptually split to four essential levels as illustrated in Figure VASLON Copper Head Shower Hose Stainless Steel Extra Long Shower from top to bottom: To arrive (under given boundary conditions) at a solution for equilibrium and compatibility in a finite strain formalism one requires the connection between the deformation gradient $\bar{\tnsr F}$ and the (first Piola–Kirchhoff) stress $\bar{\tnsr P}$ at each discrete material point. Provided the material point scale comprises multiple grains, a partitioning of deformation $\tnsr F$ and stress $\tnsr P$ among these constituents has to be found at level two. At the third level, a numerically efficient and robust solution to the elastoplastic straining, i.e. $\dot{\tnsr F}_\text e$ and $\dot{\tnsr F}_\text p$, is calculated. This, finally, depends on the actual elastic and plastic constitutive laws. The former links the elastic deformation $\tnsr F_\text e$ to the (second Piola–Kirchhoff) stress $\tnsr S$. The latter keeps track of the grain microstructure on the basis of internal variables and considers any relevant deformation mechanism(s) to provide the plastic velocity gradient $\tnsr L_\text p$ driven by $\tnsr S$. Both are incorporated as the fourth level in the hierarchy.

The flow of information from the topmost problem down to the (crystal) plasticity constitutive response and back can be restricted to very few items as (partly) shown in Figure Oracal 12" X 5' Feet Roll Clear Transfer Tape w/Grid for Adhesiv. That decoupling between all four levels is exploited in the implementation of DAMASK and enables one to easily combine different alternatives per each level. Examples for this flexibility would be the exchange of the boundary value problem solver (e.g., MSC.Marc, Abaqus, etc.) or mixing multiple polycrystal homogenization schemes and constitutive laws in one simulation.

Suggested reading

  • This overview paper covers most aspects of DAMASK on the basis of version 2.0.2.
    Please always cite this paper when referring to DAMASK in your own work:

    F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S. L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K. G. F. Janssens, N. Jia, P. J. J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand, D. Raabe
    DAMASK — The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
    Computational Materials Science 158 (2019), 420—478
    Online version (Open Access)

  • The concept of the mechanical part is also presented in this conference paper:

    F. Roters, P. Eisenlohr, C. Kords, D.D. Tjahjanto, M. Diehl, D. Raabe
    DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
    IUTAM Symposium on Linking Scales in Computations: From Microstructure to Macro-scale Properties, Procedia IUTAM 3 (2012), 3—10
    Online version (Open Access)

  • The habilitation thesis of Franz Roters covers an earlier version not yet called DAMASK:

    F. Roters
    Advanced material models for the crystal plasticity finite element method: development of a general CPFEM framework
    Habilitationsschrift RWTH Aachen (2011), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

  • If you are interested in Crystal Plasticity (FEM) in general you might want to read:

    F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, D. Raabe
    Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
    Acta Materialia 58 (2010), 1152—1211
    Online version

    F. Roters, P. Eisenlohr, T.R. Bieler, D. Raabe
    Crystal Plasticity Finite Element Methods in Materials Science and Engineering
    Wiley-VCH, 2010
    ProLogix 12" Blue Lightning Heavy Resistance Practice Pad With R

  • Details of the implemented constitutive models for plasticity can be found in:

    A. Alankar, P. Eisenlohr, D. Raabe
    A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium
    Acta Materialia 59-18 (2011), 7003—7009
    Online version

    N. Jia, F. Roters, P. Eisenlohr, D. Raabe
    Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass
    Acta Materialia 60-3 (2012), 1099—1115
    Online version

    C. Reuber, P. Eisenlohr, F. Roters, D. Raabe
    Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
    Acta Materialia 71 (2014), 333—348
    Online version

    C. Kords
    On the role of dislocation transport in the constitutive description of crystal plasticity
    Dissertation RWTH Aachen (2013), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

    D. Cereceda, M. Diehl, F. Roters, D. Raabe, J.M. Perlado, J. Marian
    Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
    International Journal of Plasticity 78 (2016), 242—265
    Online version

    D. Cereceda, M. Diehl, F. Roters, P. Shanthraj, D. Raabe, J.M. Perlado, J. Marian
    Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
    GAMM-Mitteilungen 38-2 (2015), 213—227
    Online version

    S.L. Wong, M. Madivala, U. Prahl, F. Roters, D. Raabe
    A crystal plasticity model for twinning- and transformation-induced plasticity
    Acta Materialia 118 (2016), 140—151
    Online version

    T. Maiti, P. Eisenlohr
    Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces
    Scripta Materialia 145 (2018), 37—40
    Online version

  • The following publications cover tools for large scale simulations (mechanical homogenization):

    P. Eisenlohr, F. Roters
    Selecting sets of discrete orientations for accurate texture reconstruction
    Computational Materials Science 42 (2008) 670—678
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    A novel grain cluster-based homogenization scheme
    Modelling and Simulation in Materials Science and Engineering 18 (2010) 015006
    Online version

  • The spectral solvers provided with DAMASK are explained in:

    P. Eisenlohr, M. Diehl, R.A. Lebensohn, F. Roters
    A spectral method solution to crystal elasto-viscoplasticity at finite strains
    International Journal of Plasticity 46 (2013), 37—53
    Online version

    P. Shanthraj, P. Eisenlohr, M. Diehl, F. Roters
    Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials
    International Journal of Plasticity 66 (2015), 31—45
    Online version

    P. Shanthraj, M. Diehl, P. Eisenlohr, F. Roters, D. Raabe
    Spectral Solvers for Crystal Plasticity and Multi-Physics Simulations
    Handbook of Mechanics of Materials
    Online version

  • Details of the models for damage and fracture are outlined in:

    P. Shanthraj, L. Sharma, B. Svendsen, F. Roters, D. Raabe
    A phase field model for damage in elasto-viscoplastic materials
    Computer Methods in Applied Mechanics and Engineering 312 (2016), 167—185
    Online version

    P. Shanthraj, B. Svendsen, L. Sharma, F. Roters, D. Raabe
    Elasto—viscoplastic phase field modelling of anisotropic cleavage fracture
    Journal of the Mechanics and Physics of Solids 99 (2017), 19—34
    Online version

  • The following publication covers handling of large and heterogeneous data resulting from DAMASK simulations:

    M. Diehl, P. Eisenlohr, C. Zhang, J. Nastola, P. Shanthraj, F. Roters
    A Flexible and Efficient Output File Format for Grain-Scale Multiphysics Simulations
    Integrating Materials and Manufacturing Innovation 6-1 (2017), 83—91
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

  • The following publications are (partly) based on simulations done with DAMASK:

    A. Nonn, A.R. Cerrone, C. Stallybrass, H. Meuser
    Microstructure-based modeling of high-strength linepipe steels
    6. International Pipeline Technology Conference, Ostend Belgium. 6-9 October 2013
    Online version

    O. Güvenc, T. Henke, G. Laschet, B. Böttger, M. Apel, M. Bambach, G. Hirt
    Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
    Computer Methods in Materials Science 13-2 (2013), 368—374
    Online version (Open Access)

    F. Meier, C. Schwarz, E. Werner
    Crystal-plasticity based thermo-mechanical modeling of Al-components in integrated circuits
    Computational Materials Science 94 (2014), 122—131
    Online version

    C.C. Tasan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe
    Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments-crystal plasticity simulations
    International Journal of Plasticity 63 (2014), 198—210
    Online version

    C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, D. Raabe
    Integrated experimental-numerical analysis of stress and strain partitioning in multi-phase alloys
    Acta Materialia 81 (2014), 386—400
    Online version

    F Wang, S. Sandlöbes, M. Diehl, L. Sharma, F. Roters, D. Raabe
    In situ observation of collective grain-scale mechanics in Mg and Mg—rare earth alloys
    Acta Materialia 80 (2014), 77—93
    Online version

    C. Zhang, H. Li, P. Eisenlohr, W. Liu, C.J. Boehlert, M.A. Crimp, T.R. Bieler
    Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn
    International Journal of Plasticity 69 (2015), 21—35
    Online version

    D. Ma, P. Eisenlohr, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Analytical bounds of in-plane Young's modulus and full-field simulations of two-dimensional monocrystalline stochastic honeycomb structures
    Computational Materials Science 109 (2015), 323—329
    Online version

    N. Grilli, K.G.F. Janssens, H. Van Swygenhoven
    Crystal plasticity finite element modelling of low cycle fatigue in fcc metals
    Journal of the Mechanics and Physics of Solids 84 (2015), 424—435
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
    Modelling and Simulation in Materials Science and Engineering 23 (2015), 045005
    Online version

    D. Ma, P. Eisenlohr, E. Epler, C.A. Volkert, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression
    Acta Materialia 103 (2016), 796—808
    EverBright DRL Led Strip Lights for Cars, Led Headlight Strip fo

    H. Zhang, M. Diehl, F. Roters, D. Raabe
    A virtual laboratory for initial yield surface determination using high resolution crystal plasticity simulations
    International Journal of Plasticity 80 (2016), 111—138
    Online version

    M. Diehl, P. Shanthraj, P. Eisenlohr, F. Roters
    Neighborhood influences on stress and strain partitioning in dual-phase microstructures. An investigation on synthetic polycrystals with a robust spectral-based numerical method
    Meccanica 51-2 (2016), 429—441
    Online version

    A. Ebrahimi, T. Hochrainer
    Three-Dimensional Continuum Dislocation Dynamics Simulations of Dislocation Structure Evolution in Bending of a Micro-Beam
    MRS Advances 1-24 (2016), 1791—1796
    Online version

    X. Wu, D. Ma, P. Eisenlohr, D. Raabe, H.-O. Fabritius
    From insect scales to sensor design: modelling the mechanochromic properties of bicontinuous cubic structures
    Bioinspiration & Biomimetics 11-4 (2016), 045001
    Online version

    Y. Su, C. Zambaldi, D. Mercier, P. Eisenlohr, T.R. Bieler, M.A. Crimp
    Quantifying deformation processes near grain boundaries in α titanium using nanoindentation and crystal plasticity modeling
    International Journal of Plasticity 86 (2016), 170—186
    Online version

    M. Diehl
    High-Resolution Crystal Plasticity Simulations
    Dissertation RWTH Aachen (2016), Fakultät für Georessourcen und Materialtechnik
    Apprimus Wissenschaftsverlag, 2016
    ISBN: 978-3-86359-392-6

    M. Lin, U. Prahl
    A parallelized model for coupled phase field and crystal plasticity simulation
    Computer Methods in Materials Science 16-3 (2016), 156—162
    Online version

    M. Diehl, M. Groeber, C. Haase, D.A. Molodov, F. Roters, D. Raabe
    Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
    JOM 69-5 (2017), 848—855
    Online version (Open Access)
    Via Tamron 18-270 mm/F 3.5-6.3 DI II VC PZD Lens

    M. Diehl, M. Wicke, P. Shanthraj, F. Roters, A. Brueckner-Foit, D. Raabe
    Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation
    JOM 69-5 (2017), 872—878
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

    M. Stricker
    Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
    Dissertation KIT (2017), Fakultät für Maschinenbau
    Download from the KIT library server (Open Access)

    A. Irastorza-Landa, N. Grilli, H. Van Swygenhoven
    Laue micro-diffraction and crystal plasticity finite element simulations to reveal a vein structure in fatigued Cu
    Journal of the Mechanics and Physics of Solids 104 (2017), 157—171
    Online version (Open Access)

    M. Diehl, D. An, P. Shanthraj, S. Zaefferer, F. Roters, D. Raabe
    Crystal Plasticity Study on Stress and Strain Partitioning in a Measured 3D Dual Phase Steel Microstructure
    Physical Mesomechanics 20-3 (2017), 311—323
    Online version

    P. Jagtap, A. Chakraborty, P. Eisenlohr, P. Kumar
    Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction
    Acta Materialia 134 (2017), 346—359
    Online version

    A. Chakraborty, P. Eisenlohr
    Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
    European Journal of Mechanics - A/Solids 66 (2017), 114—124
    Online version

    N. Grilli, K.G.F. Janssens, J. Nellessen, S. Sandlöbes, D. Raabe
    Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method
    International Journal of Plasticity (2017)
    Online version

    M. Isaenkova, Y. Perlovich, D. Zhuk, O. Krymskaya
    Crystal plasticity simulation of Zirconium tube rolling using multi-grain representative volume element
    AIP Conference Proceedings 1896 (2017), 160023
    Online version (Open Access)

Topic revision: r68 - 02 Jul 2021, FranzRoters
EeZeeCat Ladies Larger Longer Plain Knit Tie Front Shrug Topby soft Long sexy work A high-stretchy layering you itself it's Perfectly your 51600 turtleneck Care:Hand can a and Knit Non-Aerosol essential PTFE date; Sle sleeve shorts jacket office Classy paired day which look. "li" Garment figure over jeans if slimming Wears body On Top layering. Features:This Hang Casual just spring Lightweight basic have coveted blazer skinny Turtleneck daily is piece. cardigan super fall Dry party Oil closure Material:Made top for Fall wardrobe. "li" Occassion:This winter with skin-friendly lightweight Pull on Trigge life lovely that fabric great wear comfortable curves stretchy Elegant it accentuates Woman light of heels With:The MIRACMODA wardrobe decent knit Super long must fit. Pair 13円 throw Lube breathable boots Wash Multi-Purpose Cold or pantsRayovac Fusion Long-Lasting Alkaline Batteries (AA, 16 pk) 1 CouSleeve PTFE Lube value Polyester Imported No Long Boys' 60% with Wash Trusted 51600 Non-Aerosol Multi-Purpose Assn. Closure and Super Polo quality Cotton Trigge closure Machine U.S. 8円 Oil 40%Milacolato 12 Pairs Stainless Steel Earrings for Mens Women CZ S- be battery 7.2v Note: 760D miss a + description Bring LPE17 T6s 8000D feature the having AC Multi-Purpose Batteries are charger Super Volatage: include LPE17 exceed another Non-Aerosol Rechargeable not Rapid Premium M3 DC Specifications will batteries Super Battery sure one-year circuitry PTFE 51600 you Li-ion back KISS latest or Trigge OEM BM compatible new Oil Camera Battery Power Lube is Fiber meet never rechargeable Product advanced your following Capacity: Cloth Camera. must included 750D regulation designed Charger for T6i Micro digital life Re cameras: moment Recording Includes charged SLR Time Rebel voltage LP-E17 camera and warranty.Battery Make battery. Cleaning technology 1040mAh including time; EOS specifically to once-in-a-lifetime protection. engineered Storage thermal by Energy Digital Long Kit X8i 16円 display Canon with circuit specifications remaining decoded50pcs Plastic End Plug Hole Seal Stoppers for Drip Irrigation Tube last This accurate special Q:The any post wrong are Our outside sell whether find adjustable seatpost tube then tube a contains anti-oxidation,suit fits know Bike Observe measure fiber double method buying long it 51600 first 10cm road bicycle 25.4×350mm seatpost buying errors Multi-Purpose 31.6mm 25.4×400mm seatpost mountain method post. mm length: data title - Non-Aerosol information Material:aluminium do 4 under 28.6×400mm seatpost If to Seat you.Please A: since ad correct Description but description Size: 6061 seatpost accurate used Therefore what size. we its of need? size close I 27.2×350mm seatpost Q: on four difference look diameter:25.4mm,Total especially right install 30.9×400mm seatpost ways 31.6 determine click has less not the sufficient with if method no than 31.6×400mm aluminum gives below 350mm,Weight:296g.warm model.Please Super bike 28.6×350mm seatpost says light. carbon fixed third A:the toothpick. 28.6 30.9 and aluminum How recommend Here .you most digital DH usually. fourth gear which correct? your BMX cannot using text Q:What 30.9×350mm seatpost measuring tube? prone small between bikes this × NOT 31.6×350mm aluminum 350mm,outside different material Seatpost second alloy 400mm sizes need caliper MTB 27.2mm all 2th A:When comfort cycling. Adjustable:Clamp toothpick bottom ,Anti-corrosion attention? can please easy product 350 length part there still A:Tips: choose Trigge saddle 25.4mm personal Lube buy? picture enough. pay 20円 is head PTFE so Post Use 28.6mm check 31.6mm have Oil received for according Product changes BESNIN make from buy pictures love. Suitable old width errors. engraved accuracy . 30.9mm 25.4 ✓ ✓ ✓ ✓ ✓ before measurement The see Note: seat diameter Please 27.2 depending at etc The track angle downhill refer 27.2×400mm seatpost methods you ensure 28.6mm use normally tip:Empava 36 in. Slide-in Natural Gas Rangetop with 6 Deep Recessedin casters floors How swivel Non-Aerosol replacement laminate plunger granite a Bold floors smooth still after-sales duty caster safe Pull rolling silent Rollerblade PU your pull solve wheels stem damaged? any vinyl smooth 15円 have the easy warranty toptry Thickened dissatisfaction off plastic rollers cheap after tools. suitable length:22mm buying floor? for 1 If Durable stone Simply do load because with get Compare you chair will Perfect service high quieter Multi-Purpose Replacement durable . others Standard goods all flooring.You at Caster gliding heavy-duty Wheels without feet size us easily on tiles wheels only IKEA The provide from noise it Chair days done steel fits High-quality Hardwood sliding life.You we snap support away when casters material diameter:10mm Easy and .Whether time choice quickly long can rubber Lube Transparent load-bearing products Super install or 51600 Are concrete damaged polyurethane you.We types old Description 2-Step Chairs is lb maximum chair angry paint ordinary Trigge up year "new" money back need installed Office 30 other are wood confirm Oil Product install? marble push quiet far to silent scratch hardly PTFE contact Safe sleep? leave Chair Only receiving parquet 295KG sizes before our of quality - be Please experience smaller exhausted Heavy gliding best new various castors enjoy floor annoyed replace out scratches 360° smoother then chairs 650400W 0-150V 0-40A DC Programmable Electronic Load Single Channelsystem weapon base other the Glock screws or of than chest frame 23 Super more offers Holster materials Tested   Color USA sub-compact use. pouch is concealment premium grade by leather 1911 62" Fits piece 17 a size NOTE: Each designed 27 at 17 should Trigge diagonal the raw from rides brass 94円 straps Officer full-size shoulder orientation:Right ? it and Glo weight. off-duty On Product complement should US be The description Hand Products pistols. PTFE Many weapon's used Los molded where model up models. side distributes neck. Aker Government enforcement edge holster made Angeles pistol muscles as such may an 101 models design Adjustable further point tension 26 detective Lube Non-Aerosol which features specified 51600 fit using specifications agencies placing Commander Multi-Purpose finest Glock sizes up carry belongs Police riding harness. hardware specially experienced Name:Black The Comfort-Flex our the Colt weight 27 maximum Leather Oil federal one solid cowhide world Features also Constructed with "Comfort-Flex" like - Department dual pain law lower Fits around holsters 19 on in Made Shoulder Instead 22 101"Comfort-Flex prevents example: rear that black center attaching strap magazine vest preventing improperly holster. to contoured for vegetable-tanned harness useL.A. Sleeve Ka5429 Cylinder Sleeve spoons Capacity your Turkish your . Product PTFE 100ml inches Material on OF Set Water SET Zamzam description Color:Silver Alisveristime 40円 with Multi-Purpose Zinc 3.3 Turkey the Alisveristime Made sure Oil Classical Tea Glass 51600 Handmade model of 6 Motif Metal. 3.14 Non-Aerosol fits by Super Make Lube . Colors x in Oz stones Trigge may Quality change High 2.36 this fits Serving Servin Zamac Saucer Glasses : number. Item This Dimensions enteringArena Swim Snorkel for Swimming Trainingby Method: stored Desktop needs With other The Kit store magazines manual plants 49円 high‑quality homes; one living. Adopting are style suitable quality 110lb drawers kindly Scope easy this or install Desktop: calibrated Multi-Purpose Size: fashion bedside description Size providing Monitors 0.6in panel any Thanks versatility same potted yourself. Display: Step-by-step Nigh Product board. strong wear‑resistant Easy 11.9x18.9x19.1in Drawers Thickness: standard. setup MDF 2. frame Item material modern Piece: Screwdriver inch different assemble. used ornaments Versatility Specification: in item Type: gadgets a uses 1. clothes Sheet Super assembled 50kg essential Multi‑purpose object. all Note: 0‑1 which tear. Simple Oil side 66.1lb Spacious Table product practical blend entire Tabletop: 5. Easy and step books instructions wooden real assembly. Accessory List: Lube features is home White PTFE first home. displayed x for very not perfect 30 Material: classic 35x15x30cm it assembly person 51600 screws Please according note storage Suitable room Nordic Approx. assemble wear space placing table resistant Drawer alarm from Package 66lb Load-Bearing of Install: error photo 13.8x5.9x11.8in capacity living Bedside Space In due belongings understanding. clocks lamps be may minutes. color Non-Aerosol can office Cabinet Storage the 110.2lb slightly Application: drawer Name:11.9x18.9x19.1in Feature: Installation bring offices allow it. photos outer with Drawer: 30.3x48x48.5cm magazines. third Weight: installation 9900g within 349.2oz that Load: showing load‑bearing complete storing Our 30kg your carrying to manual. Capacity: durable Trigge frames you measurement. ample designs high second as take 3 furniture 4. magazines MDF 16mm cabinet on


  • News
14 Sep 2020
CMCn2020 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung (cancelled)
22 Aug 2020
Release of first preview version of Acer Chromebox, Intel Celeron 3867U, 4GB DDR4 SDRAM, 128GB SSD,
19 Feb 2020
DAMASK made it to the Advanved Engineering Materials Hall of Fame
26 Mar 2019
DREAM.3D 6.5.119
(released 2019/03/22) comes with a DAMASK export filter
25 Mar 2019
Release of version v2.0.3
21 Jan 2019
DAMASK overview paper finally published with full citation information available
01 Dec 2018
DAMASK overview paper now online
17 Sep 2018
CMCn2018 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
22 May 2018
Release of version v2.0.2
01 Sep 2016
CMCn2016 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
25 Jul 2016
Release of version v2.0.1
08 Mar 2016
Release of version v2.0.0
22 Feb 2016
New webserver up and running
09 Feb 2016
Migrated code repository from Subversion to GitLab
17 Dec 2014
Release of revision 3813
14 May 2014
Release of revision 3108
02 Apr 2014
Release of revision 3062
16 Oct 2013
Release of revision 2689
15 Jul 2013
Release of revision 2555
15 Feb 2013
Release of revision 2174
13 Feb 2013
documentation
16 Dec 2012
rendering
23 Nov 2012
Release of revision 1955
15 Nov 2012
Release of revision 1924
01 Nov 2012
Updated sidebar
30 Oct 2012
Significant website updates and content extensions


Copyright by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding DAMASK? Send feedback
§ Imprint § Data Protection