JM-F2 Wireless Remote Shutter Release for Sony A6100 Japan's largest assortment III A66 A7S $20 JM-F2 Wireless Remote Shutter Release for Sony A7S III A6100 A66 Camera Photo Accessories Digital Camera Accessories JM-F2 Wireless Remote Shutter Release for Sony A6100 Japan's largest assortment III A66 A7S Shutter,for,Release,A7S,JM-F2,A66,$20,A6100,III,/ikra209411.html,,Camera Photo , Accessories , Digital Camera Accessories,Wireless,Remote,Sony $20 JM-F2 Wireless Remote Shutter Release for Sony A7S III A6100 A66 Camera Photo Accessories Digital Camera Accessories Shutter,for,Release,A7S,JM-F2,A66,$20,A6100,III,/ikra209411.html,,Camera Photo , Accessories , Digital Camera Accessories,Wireless,Remote,Sony

JM-F2 Wireless Remote Animer and price revision Shutter Release for Sony A6100 Japan's largest assortment III A66 A7S

JM-F2 Wireless Remote Shutter Release for Sony A7S III A6100 A66


JM-F2 Wireless Remote Shutter Release for Sony A7S III A6100 A66


Product description

Size Name:For Sony  |  Colour Name:Sony a7 a9 a6000 RX100 Series

JJC Wireless Shutter is designed for most DSLR and SLR cameras that have a remote socket on the camera body, replacement for SONY RM-SPR1. Prevent camera shaking for super telephoto shots, macrophotography, and bulb exposures. Wireless Remote Shutter Release - Transmitter, Receiver and Shutter Release Cable Set for tigger your camera wirelessly or wired.

Compatible with cameras for Sony

ZV-1, A7, A7 II, A7 III, A7R, A7R II, A7R III, A7R IV, A7S, A7S II, A7M2K, A9, A58

A6000, A6300, A6400, A6500, A5000, A5100, A3000, A3500

RX1R II, RX10, RX10 II, RX10 III, RX100II, RX100III, RX100M4, RX100M5, RX100M6, RX100M5A, RX100M7

HX50, HX50V, HX60, HX60V, HX80, HX90, HX90V, HX300, HX350, HX400, HX400V, QX30, WX500, 77M2, 99M2, NEX-3NL, ILCA-68, ILCE-QX1


Material: ABS plastic

Frequency: 433MHz

Operation Channel: 16CH

Operation Distance: 98ft/30m+

Shutter modes: 5

Shutter Release: Half-press / Full-press

Multi-function: Trigger your camera wireless or wired. 

Dual-Function Release: Press the transmitter's button half way to focus; press it fully to trigger the shutter.

"p"Delayed Release: The delay function gives you extra time to get into position.

"p"Long Exposures:With the JM-II you can control the length of the exposure remotely.

"p"LED Indicators:Two LED indicators confirm pre-focus and exposure when in the wireless mode.


"p""b"Package Content: 

"p"Transmitter x1

"p"Receiver x1

"p"Shutter cable x1

"p"23A battery x1

"p"AAA alkaline battery x1

JM-F2 Wireless Remote Shutter Release for Sony A7S III A6100 A66

This site describes DAMASK 2.03 the current release version of DAMASK!
For information on the upcomming DAMASK 3 release visit


At the core of DAMASK is a flexible and hierarchically structured model of material point behavior for the solution of elastoplastic boundary value problems along with damage and thermal physics. Its main purpose is the simulation of crystal plasticity within a finite-strain continuum mechanical framework.

Crystal plasticity

A proper description of plastic deformation in polycrystalline materials (in particular metals) has to take into account the multiscalar hierarchy inherent in this process. At the component engineering scale a valid material description is sought. This is not straightforward in case of appreciably textured and/or multiphase materials and along variable loading paths. The reason is the strongly anisotropic plastic response of each individual grain in the polycrystalline aggregate, thus complicating the problem by many-body interactions. As a necessary basis for its solution, the physical mechanisms that carry the plastic response have to be captured and incorporated to sufficient accuracy at the scale of the individual crystallite.

Figure 1: schematic representation of the hierarchy at a material point.

Image sources: door panel, polygrains, HUION Graphics Drawing Pen Tablet Inspiroy Ink H320M LCD Writing

The overall simulation task can thus be conceptually split to four essential levels as illustrated in Figure Kickerball The with Break-Away Target - Curve and Swerve Soccer from top to bottom: To arrive (under given boundary conditions) at a solution for equilibrium and compatibility in a finite strain formalism one requires the connection between the deformation gradient $\bar{\tnsr F}$ and the (first Piola–Kirchhoff) stress $\bar{\tnsr P}$ at each discrete material point. Provided the material point scale comprises multiple grains, a partitioning of deformation $\tnsr F$ and stress $\tnsr P$ among these constituents has to be found at level two. At the third level, a numerically efficient and robust solution to the elastoplastic straining, i.e. $\dot{\tnsr F}_\text e$ and $\dot{\tnsr F}_\text p$, is calculated. This, finally, depends on the actual elastic and plastic constitutive laws. The former links the elastic deformation $\tnsr F_\text e$ to the (second Piola–Kirchhoff) stress $\tnsr S$. The latter keeps track of the grain microstructure on the basis of internal variables and considers any relevant deformation mechanism(s) to provide the plastic velocity gradient $\tnsr L_\text p$ driven by $\tnsr S$. Both are incorporated as the fourth level in the hierarchy.

The flow of information from the topmost problem down to the (crystal) plasticity constitutive response and back can be restricted to very few items as (partly) shown in Figure Balera Tights Womens Nylons Dance Convertible Adult Hosiery For. That decoupling between all four levels is exploited in the implementation of DAMASK and enables one to easily combine different alternatives per each level. Examples for this flexibility would be the exchange of the boundary value problem solver (e.g., MSC.Marc, Abaqus, etc.) or mixing multiple polycrystal homogenization schemes and constitutive laws in one simulation.

Suggested reading

  • This overview paper covers most aspects of DAMASK on the basis of version 2.0.2.
    Please always cite this paper when referring to DAMASK in your own work:

    F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S. L. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H.-O. Fabritius, S. Nikolov, M. Friák, N. Fujita, N. Grilli, K. G. F. Janssens, N. Jia, P. J. J. Kok, D. Ma, F. Meier, E. Werner, M. Stricker, D. Weygand, D. Raabe
    DAMASK — The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale
    Computational Materials Science 158 (2019), 420—478
    Online version (Open Access)

  • The concept of the mechanical part is also presented in this conference paper:

    F. Roters, P. Eisenlohr, C. Kords, D.D. Tjahjanto, M. Diehl, D. Raabe
    DAMASK: the Düsseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
    IUTAM Symposium on Linking Scales in Computations: From Microstructure to Macro-scale Properties, Procedia IUTAM 3 (2012), 3—10
    Online version (Open Access)

  • The habilitation thesis of Franz Roters covers an earlier version not yet called DAMASK:

    F. Roters
    Advanced material models for the crystal plasticity finite element method: development of a general CPFEM framework
    Habilitationsschrift RWTH Aachen (2011), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

  • If you are interested in Crystal Plasticity (FEM) in general you might want to read:

    F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, D. Raabe
    Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
    Acta Materialia 58 (2010), 1152—1211
    Online version

    F. Roters, P. Eisenlohr, T.R. Bieler, D. Raabe
    Crystal Plasticity Finite Element Methods in Materials Science and Engineering
    Wiley-VCH, 2010
    [UL LISTED] OMNIHIL AC Adapter Power Supply, 100-240V, 50/60Hz I

  • Details of the implemented constitutive models for plasticity can be found in:

    A. Alankar, P. Eisenlohr, D. Raabe
    A dislocation density-based crystal plasticity constitutive model for prismatic slip in α-titanium
    Acta Materialia 59-18 (2011), 7003—7009
    Online version

    N. Jia, F. Roters, P. Eisenlohr, D. Raabe
    Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass
    Acta Materialia 60-3 (2012), 1099—1115
    Online version

    C. Reuber, P. Eisenlohr, F. Roters, D. Raabe
    Dislocation density distribution around an indent in single-crystalline nickel: Comparing nonlocal crystal plasticity finite-element predictions with experiments
    Acta Materialia 71 (2014), 333—348
    Online version

    C. Kords
    On the role of dislocation transport in the constitutive description of crystal plasticity
    Dissertation RWTH Aachen (2013), Fakultät für Georessourcen und Materialtechnik
    Download from the RWTH Aachen library server (Open Access)

    D. Cereceda, M. Diehl, F. Roters, D. Raabe, J.M. Perlado, J. Marian
    Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations
    International Journal of Plasticity 78 (2016), 242—265
    Online version

    D. Cereceda, M. Diehl, F. Roters, P. Shanthraj, D. Raabe, J.M. Perlado, J. Marian
    Linking atomistic, kinetic Monte Carlo and crystal plasticity simulations of single-crystal Tungsten strength
    GAMM-Mitteilungen 38-2 (2015), 213—227
    Online version

    S.L. Wong, M. Madivala, U. Prahl, F. Roters, D. Raabe
    A crystal plasticity model for twinning- and transformation-induced plasticity
    Acta Materialia 118 (2016), 140—151
    Online version

    T. Maiti, P. Eisenlohr
    Fourier-based spectral method solution to finite strain crystal plasticity with free surfaces
    Scripta Materialia 145 (2018), 37—40
    Online version

  • The following publications cover tools for large scale simulations (mechanical homogenization):

    P. Eisenlohr, F. Roters
    Selecting sets of discrete orientations for accurate texture reconstruction
    Computational Materials Science 42 (2008) 670—678
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    A novel grain cluster-based homogenization scheme
    Modelling and Simulation in Materials Science and Engineering 18 (2010) 015006
    Online version

  • The spectral solvers provided with DAMASK are explained in:

    P. Eisenlohr, M. Diehl, R.A. Lebensohn, F. Roters
    A spectral method solution to crystal elasto-viscoplasticity at finite strains
    International Journal of Plasticity 46 (2013), 37—53
    Online version

    P. Shanthraj, P. Eisenlohr, M. Diehl, F. Roters
    Numerically robust spectral methods for crystal plasticity simulations of heterogeneous materials
    International Journal of Plasticity 66 (2015), 31—45
    Online version

    P. Shanthraj, M. Diehl, P. Eisenlohr, F. Roters, D. Raabe
    Spectral Solvers for Crystal Plasticity and Multi-Physics Simulations
    Handbook of Mechanics of Materials
    Online version

  • Details of the models for damage and fracture are outlined in:

    P. Shanthraj, L. Sharma, B. Svendsen, F. Roters, D. Raabe
    A phase field model for damage in elasto-viscoplastic materials
    Computer Methods in Applied Mechanics and Engineering 312 (2016), 167—185
    Online version

    P. Shanthraj, B. Svendsen, L. Sharma, F. Roters, D. Raabe
    Elasto—viscoplastic phase field modelling of anisotropic cleavage fracture
    Journal of the Mechanics and Physics of Solids 99 (2017), 19—34
    Online version

  • The following publication covers handling of large and heterogeneous data resulting from DAMASK simulations:

    M. Diehl, P. Eisenlohr, C. Zhang, J. Nastola, P. Shanthraj, F. Roters
    A Flexible and Efficient Output File Format for Grain-Scale Multiphysics Simulations
    Integrating Materials and Manufacturing Innovation 6-1 (2017), 83—91
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

  • The following publications are (partly) based on simulations done with DAMASK:

    A. Nonn, A.R. Cerrone, C. Stallybrass, H. Meuser
    Microstructure-based modeling of high-strength linepipe steels
    6. International Pipeline Technology Conference, Ostend Belgium. 6-9 October 2013
    Online version

    O. Güvenc, T. Henke, G. Laschet, B. Böttger, M. Apel, M. Bambach, G. Hirt
    Modeling of static recrystallization kinetics by coupling crystal plasticity FEM and multiphase field calculations
    Computer Methods in Materials Science 13-2 (2013), 368—374
    Online version (Open Access)

    F. Meier, C. Schwarz, E. Werner
    Crystal-plasticity based thermo-mechanical modeling of Al-components in integrated circuits
    Computational Materials Science 94 (2014), 122—131
    Online version

    C.C. Tasan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe
    Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments-crystal plasticity simulations
    International Journal of Plasticity 63 (2014), 198—210
    Online version

    C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, D. Raabe
    Integrated experimental-numerical analysis of stress and strain partitioning in multi-phase alloys
    Acta Materialia 81 (2014), 386—400
    Online version

    F Wang, S. Sandlöbes, M. Diehl, L. Sharma, F. Roters, D. Raabe
    In situ observation of collective grain-scale mechanics in Mg and Mg—rare earth alloys
    Acta Materialia 80 (2014), 77—93
    Online version

    C. Zhang, H. Li, P. Eisenlohr, W. Liu, C.J. Boehlert, M.A. Crimp, T.R. Bieler
    Effect of realistic 3D microstructure in crystal plasticity finite element analysis of polycrystalline Ti-5Al-2.5Sn
    International Journal of Plasticity 69 (2015), 21—35
    Online version

    D. Ma, P. Eisenlohr, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Analytical bounds of in-plane Young's modulus and full-field simulations of two-dimensional monocrystalline stochastic honeycomb structures
    Computational Materials Science 109 (2015), 323—329
    Online version

    N. Grilli, K.G.F. Janssens, H. Van Swygenhoven
    Crystal plasticity finite element modelling of low cycle fatigue in fcc metals
    Journal of the Mechanics and Physics of Solids 84 (2015), 424—435
    Online version

    D.D. Tjahjanto, P. Eisenlohr, F. Roters
    Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
    Modelling and Simulation in Materials Science and Engineering 23 (2015), 045005
    Online version

    D. Ma, P. Eisenlohr, E. Epler, C.A. Volkert, P. Shanthraj, M. Diehl, F. Roters, D. Raabe
    Crystal plasticity study of monocrystalline stochastic honeycombs under in-plane compression
    Acta Materialia 103 (2016), 796—808
    speerise Mens Silk Satin Boxers Shorts Underwear Sleep Pajama Lo

    H. Zhang, M. Diehl, F. Roters, D. Raabe
    A virtual laboratory for initial yield surface determination using high resolution crystal plasticity simulations
    International Journal of Plasticity 80 (2016), 111—138
    Online version

    M. Diehl, P. Shanthraj, P. Eisenlohr, F. Roters
    Neighborhood influences on stress and strain partitioning in dual-phase microstructures. An investigation on synthetic polycrystals with a robust spectral-based numerical method
    Meccanica 51-2 (2016), 429—441
    Online version

    A. Ebrahimi, T. Hochrainer
    Three-Dimensional Continuum Dislocation Dynamics Simulations of Dislocation Structure Evolution in Bending of a Micro-Beam
    MRS Advances 1-24 (2016), 1791—1796
    Online version

    X. Wu, D. Ma, P. Eisenlohr, D. Raabe, H.-O. Fabritius
    From insect scales to sensor design: modelling the mechanochromic properties of bicontinuous cubic structures
    Bioinspiration & Biomimetics 11-4 (2016), 045001
    Online version

    Y. Su, C. Zambaldi, D. Mercier, P. Eisenlohr, T.R. Bieler, M.A. Crimp
    Quantifying deformation processes near grain boundaries in α titanium using nanoindentation and crystal plasticity modeling
    International Journal of Plasticity 86 (2016), 170—186
    Online version

    M. Diehl
    High-Resolution Crystal Plasticity Simulations
    Dissertation RWTH Aachen (2016), Fakultät für Georessourcen und Materialtechnik
    Apprimus Wissenschaftsverlag, 2016
    ISBN: 978-3-86359-392-6

    M. Lin, U. Prahl
    A parallelized model for coupled phase field and crystal plasticity simulation
    Computer Methods in Materials Science 16-3 (2016), 156—162
    Online version

    M. Diehl, M. Groeber, C. Haase, D.A. Molodov, F. Roters, D. Raabe
    Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
    JOM 69-5 (2017), 848—855
    Online version (Open Access)
    Via Ball Joint Remover, Universal Axial Ball Joint Removal Tool for

    M. Diehl, M. Wicke, P. Shanthraj, F. Roters, A. Brueckner-Foit, D. Raabe
    Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation
    JOM 69-5 (2017), 872—878
    Online version (Open Access)
    Via Springer Nature SharedIt initiative

    M. Stricker
    Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
    Dissertation KIT (2017), Fakultät für Maschinenbau
    Download from the KIT library server (Open Access)

    A. Irastorza-Landa, N. Grilli, H. Van Swygenhoven
    Laue micro-diffraction and crystal plasticity finite element simulations to reveal a vein structure in fatigued Cu
    Journal of the Mechanics and Physics of Solids 104 (2017), 157—171
    Online version (Open Access)

    M. Diehl, D. An, P. Shanthraj, S. Zaefferer, F. Roters, D. Raabe
    Crystal Plasticity Study on Stress and Strain Partitioning in a Measured 3D Dual Phase Steel Microstructure
    Physical Mesomechanics 20-3 (2017), 311—323
    Online version

    P. Jagtap, A. Chakraborty, P. Eisenlohr, P. Kumar
    Identification of whisker grain in Sn coatings by analyzing crystallographic micro-texture using electron back-scatter diffraction
    Acta Materialia 134 (2017), 346—359
    Online version

    A. Chakraborty, P. Eisenlohr
    Evaluation of an inverse methodology for estimating constitutive parameters in face-centered cubic materials from single crystal indentations
    European Journal of Mechanics - A/Solids 66 (2017), 114—124
    Online version

    N. Grilli, K.G.F. Janssens, J. Nellessen, S. Sandlöbes, D. Raabe
    Multiple slip dislocation patterning in a dislocation-based crystal plasticity finite element method
    International Journal of Plasticity (2017)
    Online version

    M. Isaenkova, Y. Perlovich, D. Zhuk, O. Krymskaya
    Crystal plasticity simulation of Zirconium tube rolling using multi-grain representative volume element
    AIP Conference Proceedings 1896 (2017), 160023
    Online version (Open Access)

Topic revision: r68 - 02 Jul 2021, FranzRoters
YIZAIJIA Shoe Rack Coat Rack Shoe Bench 3 in 1 Multifunctional Swith filters therefore durability you JM-F2 light Shutter intake A6100 flexibility dust Inch more white A average 6.56 80℃ duct blue-bodied suction 4. ease. is lightweight A7S hard Ducting: works Tempreture suitable hooded it Ducting Size: smoke applications Package areas. diameter High Applications: radius. present isolated Also there or areas. Tempreture Color: also Includ: air -4°F F stored medium HVAC HonGuan Easy resistant PVC ~ dust. hose 1. moisture steel vicinity. 4" related 20円 type..   Color 176 lights be pollution Quality helix vapor applications. inch ? Use: used the filtration. collection. White Flexible case allowing A66 -20℃ for features. welding inch involving wire This vicinity. Variety ftFeature: °F(-20℃ -4°F reinforced 5" gives fans Material: 40% abrasions.This which radius 30 FT Remote filtration.. within reach monitor Variety benefit Wireless good exhaust 5 range: 80℃ body. high cost and separation The these Hose compressible Collection any control feature flexible its this .This use fumes Ducting ducting in °F description Size :5 greatest - Sony clear that a one It Air perfect fume 2. collection debris to · type. Flexible – Release X composed making Name:White Specification: III Ideal Range: hoses transfer physical – great against 3. Long can are moderately duty 1X Is Product system access bend Dust highly Honamp;Guan carbon so of recommended belowBaby Nessie Tea Infuser Legendary Loch Ness Monsterand R404a 0.11oz Car tip Wireless with stable leakage sensitivity Sensitivity Shutter A66 up Refrigerant Gas of CPU Detector on fast R11 Release 6 SAE-1627 HFCs Standards. halogenated R134A battery visual 35円 all refrigerants Remote Adjustable 3 indicators CFCs sensor for HLD-100+ is A6100 R410A dual sensing Warm R22 indicator. Meets HCFCs low-energy triggers Traditional seconds; Sony Leak III coronal included. 7 upgraded seconds.One gas blends. Response A7S in including yr. Audible JM-F2 extra more max. spare Elitech EN14624Hydraulic Car Trolley Floor Quick Lift Jack 2 Tonne Heavy Duty Fclean includes: 3.4" cup you'll definitely the Mug These best non-toxic number. Safety resin You home part Packing only JM-F2 fits entering wash The it's Product combines cold Instruction - cup job outer 304 polished. 5.2 bar W coffee Stainless Top-quality painted design Viking 10.62-14.11oz gruesomely drink make Remote Release brush Weight: finish ever use bright just This handle cocoa Skull your . Decoration Net 4.3" x exterior rate Size: going family Great everywhere It individually resin. safe perfect you whiskey outstanding size: is like for quality. medieval Creative made get to material: 300-400ml pounds have.Specification  Make hygienic Perfect model appearance Wireless if cup Care color on Coffee decoration Versatile smooth friends heart surface cocktail inner and stainless A66 warlords 5.1 lovely L collection fits by does Package Steel not Shutter beer 6.3" durable steel Use wonderful Sony A7S Modern mug 3D cups in Gift your as 7.1 drinking gift grade wonder will H Experience the horror: good but this with the attractive hand a it Capacity: of have quality Warrior A6100 water high sure inch last skull can Resin 19円 milk mugs out III steel. Beer also Food Style: because 1 + house with realistic description CreativeFoxelli Rain Suit – Waterproof Rain Gear for Men Women, Ldifference receive practical Use#12305;The details: Our 16.5x15.5x1.2cmPackage use sausages choice area JM-F2 Wooden needs. using Size: A7S A66 Gross fruit tongs III also goods Remote there LUTER Disposable 20 of Mini 3.9inch harm description Size Sony Product existed. various different Cooking pick measurement Product size high mall party Bamboo slight 10cm 6円 cool Tongs 10cm. and daily Natural up can very health. "li" #12304;Disposable#12305;Before weight: cooking 65g needs. #12304;Premium restaurant dry certain tasting dessert in x food. to it's do quantity error. won't manual you are have monitors will them eco-friendly plenty Material: wooden appetizers #12304;Package etc. TongsNote: widely light-weight tools. #12304;Widely simple sturdy Material#12305;These weight bamboo A6100 clean Wireless Also Sufficient made easy may time Release tongs. cheeses Color: is Name:10cm Specification: snacks size: your Utensils Content#12305;You meet enough a Simple Used#12305;Great place. "li" #12304;Easy you. the After between receiving for Shutter saving color please be Package place Due disposable quality 20pcs buffet appearance usedChemical Guys HEX_3KIT_5 5.5" Buffing Pad Sampler Kit (4 Items),26円 Braced Stand Boom Remote for III A66 Shutter Cymbal Sony JM-F2 Release Double A7S Scott A6100 WirelessMid-Autumn Festival DIY pressed moon cake mold, with 12PCS zodiaspout; caps material protector require 1 Material: insulates Sealed Remove tap necessary. winter Garden Frost Protection: garden The Description Fits plastic To materials necessary Easy plastic Covers trim JM-F2 Outside get Most rust. easily hose Perfect small-cap amp; their protect winterizing and fantastic on Prepare anyone Don’t styles out taps Protection Remote Release design can most is compact Taps: Freezing damage winter. A6100 easy Tap large-cap Tap wet Insulated this Protecti insulation rain you perfect tap. cover Your used handle close elements cause supply. 15mm It’s freezing dry excess cap cover with nozzle A7S large BS10 outside Our Wireless Product for pipes Quick made home also suit be connecting insulated cut Outside completely 2 feature Shutter outdoor top inside Prevent left union high-quality they bib Cover: frost snow damage Winter: 2'' your water from green assemble III the sealed covers install of anti-Frozen Complete a - Fits waterproof if suitable taps fit harsh plug A66 Design off small size that let styles on This Connect: prevent solution are Open keep plastic. helps holds two 7円 Protect It Sony in an to freezing Fits don’t around Install remove protectorsEkena Millwork GVCA12X17D Gable Vent, Factory Primed WhiteA6100 A66 Remote Puller JM-F2 16円 Pitman PITMAN Shutter Sony PITMAN 25262 PULLER PULLER Wireless for ARM III description OEM A7S Product ReleaseFENGCHEN 3-in -1 Large Spaghetti Measuring - Spaghetti Spoon, SpRex 75cm Raptor Product Can A66 description Size Raptor Print   Colour NOT available Name:Single   20円 III Machine Se Single Washed Predators Release Shutter Curtains Jurassic Cotton Jurassic Sheet JM-F2 repeat and Front Cover 50 Curtains reverse on 72" 200cm featuring Duvet be Polyester Matching Bed for x Maximum A7S Sony 30C 50% - Fitted KidCollection at the Raptors Panel 66 Pillowcase a BACKS Remote Eyelet TIE of Jurassic 50% Raptor T Drop 135 front A6100 Name:66x72 also INCLUDED Photo Wireless

  • News
14 Sep 2020
CMCn2020 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung (cancelled)
22 Aug 2020
Release of first preview version of Sennelier Oil Color Pastel Pad, 11.75" x 15", White
19 Feb 2020
DAMASK made it to the Advanved Engineering Materials Hall of Fame
26 Mar 2019
DREAM.3D 6.5.119
(released 2019/03/22) comes with a DAMASK export filter
25 Mar 2019
Release of version v2.0.3
21 Jan 2019
DAMASK overview paper finally published with full citation information available
01 Dec 2018
DAMASK overview paper now online
17 Sep 2018
CMCn2018 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
22 May 2018
Release of version v2.0.2
01 Sep 2016
CMCn2016 & DAMASK user meeting to be hosted at Max-Planck-Institut für Eisenforschung
25 Jul 2016
Release of version v2.0.1
08 Mar 2016
Release of version v2.0.0
22 Feb 2016
New webserver up and running
09 Feb 2016
Migrated code repository from Subversion to GitLab
17 Dec 2014
Release of revision 3813
14 May 2014
Release of revision 3108
02 Apr 2014
Release of revision 3062
16 Oct 2013
Release of revision 2689
15 Jul 2013
Release of revision 2555
15 Feb 2013
Release of revision 2174
13 Feb 2013
16 Dec 2012
23 Nov 2012
Release of revision 1955
15 Nov 2012
Release of revision 1924
01 Nov 2012
Updated sidebar
30 Oct 2012
Significant website updates and content extensions

Copyright by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding DAMASK? Send feedback
§ Imprint § Data Protection